- ページ 2

計測機器 Downeaster 3010のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Downeaster 3010 2 ページ。 Wind direction instrument

Wind Direction Instrument

-Medallion Series (#3010)-

The Wind Direction Vane should be mounted on the peak of the

roof where it will receive the greatest exposure to the wind. Keep

away from any obstructions if possible. Be sure to install the mast

securely and vertically to prevent uneven wear.

BOX CONTENTS:

1 – Wind Direction Dial

1 – Curved Mast w/Direction Vane Assembly with 50 feet of

5/conductor Wire attached

1 – Mounting Bracket w/2 Lag Bolts and 2 U-Bolts

1 – 6 Volt AC Power Adapter

TO INSTALL:

Do not plug in the instrument until ALL connections

have been made.

1 – Attach the L-shaped bracket to the roof or rake boards with the

included lag bolts. The unit can also be attached to a chimney using

a masonry drill and screw anchors.

2 – Using the included U-bolts, attached the bottom of the curved

mast to the bracket.

3 – Before tightening the hose clamps, rotate the curved mast until

the "N" inscribed on the body of the Direction Vane Assembly faces

North.

4 – Run the 5/conductor cable into the house to the location where

the meter will be mounted.

5 – At the back of the meter, attach the five wires to the TOP five

terminals, matching color to color (see diagram)

(On some older models, an ORANGE wire is used instead of

6 – Attach the two wires from the power supply to the BOTTOM

two terminals on the rear of the instrument (either wire to either

terminal – the polarity does not matter).

BROWN.)

7 – Plug in the Adapter Plug.

When powered, the dial will display the direction the wind is

coming from. When the direction is between two compass points,

both LEDs will llght.

Altering this instrument in any way will void the warranty.

Please call with any questions regarding installation or operation.