- ページ 11

自動車アクセサリー Downeaster DED LPのPDF オーナーズ／オペレーターズ・マニュアルをオンラインで閲覧またはダウンロードできます。Downeaster DED LP 20 ページ。 Dump body scissor hoist

INSTALLATION

Prepping Frame

Prep rear of chassis frame, ensuring all fuel lines, wiring, hoses and brake lines are protected or covered from

flames or sparks.

NOTE: If the truck frame has rivets in the top flange, where the hoist saddle brackets will be mounted, add

spacers provided (rivet shims) between the truck frame and hoist mounting pads. Do not countersink the

hoist mounting plate that extends out from the sub frame. Do not remove the rivet heads! If rivets are the

round style, they may be ground flush with the rivet shim.

These plates are to be placed over the rivet heads for proper weight distribution. Failure to install Rivet Shim

Plate will result in improper load distribution and will "VOID WARRANTY "

2-B

2-A

On certain brands of trucks, some electronic modules, located on cross members, may need to be

relocated, as to not interfere with the scissor hoist mounting location. (example: GM modules shown

2-C

2-D

2-E

Cross member

Modules