- ページ 9

デジタルカメラ Dahua DH-HAC-HFW2241SP-0280BのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Dahua DH-HAC-HFW2241SP-0280B 13 ページ。 Hdcvi

Installation

Attention:



Please install the device in time after it is taken apart, which is to avoid the camera

module being exposed to damp environment for too long.



Before the installation, please make sure the installation surface is thick enough to sustain

at least 3X weight of the camera.



Please don't tear off the electrostatic adsorption film on the surface of transparent cover

before installation debugging is completed, which is to avoid damage during installation.



The installation figures below are for reference only, please refer to the actual model for

more details.

Step 1

Install camera bracket.



It needs to install expansion bolt ③ first if it is cement wall (the installation holes of

expansion bolts need to be in accordance with those of the bracket ②)， and then install

the bracket.



It can use self-tapping screws ② to install the bracket directly if it is wooden wall.

Step 2

Install camera.

Use the installation pedestal of the camera bottom and use the screws to install the camera on

the bracket.

Step 3

Adjust the camera to a proper monitoring location, tighten the button on the bracket firmly and

fix the camera.

So far, the device installation and cable connection have been completed, you can check the

device monitoring video via back-end encoding device.

Figure 4-1