ページを印刷する
6 | Description of the front panel of the proofer control panel
1
TEMPERATURE DISPLAY
Digital display for viewing prover temperature.
2
HUMIDITY DISPLAY
Digital display for viewing prover humidity.
PROVER HEATING PILOT LIGHT
3
Turns on the resistances to heat the prover to the desired
temperature.
HUMIDITY PILOT LIGHT
4
Activates the production of humidity to reach the desired
level of humidity inside the prover.
5
TEMPERATURE BUTTON
This button has two functions. Pressing once allows for
the editing of the temperature inside the prover. A pro-
longed pressing will turn the heating ON or OFF. If the led
button is lit, the heating is turned on.
3
1
5
6
7
6
7
8
MODULRAM DIGITAL | Edition A - Revision 0
2
4
8
HUMIDITY BUTTON
This button has two functions. Pressing once allows for
the editing of the humidity level inside the prover. A pro-
longed pressing will turn the production of humidity ON
or OFF. If the led button is lit, humidity is being produced.
INCREASE VALUE AND LIGHT BUTTON
This button has two functions. The button
pressed after the buttons
value shown on the display.
The button
pressed without previously pressing
these buttons will turn on the prover light. If the button is
lit, it means the light has been turned on.
DECREASE VALUE AND OFF BUTTON
The button
when pressed after the buttons
or
, will decrease the value shown on the dis-
play.
If you press the button for more than 2 seconds, the con-
trol panel will be turned ON or OFF. If the led button is lit,
it means the control panel has been turned off.
when
or
, will increase the
Instruction Manual | 16