- ページ 5

モニター Dahua D-LM24-B200のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Dahua D-LM24-B200 13 ページ。 Commercial led display

Notes

 Please put the product in a flat, stable and dry place. Avoid direct sunlight, high temperature,

humidity, dust, and corrosive gas.

 If the product is installed on the wall, please make sure the wall's load bearing capacity is

sufficient. To avoid falling and injuring people, install according to the included instructions

with mounting hardware.

 The LCD may experience image distortion or color decay when the temperature variation is

too large. Wait for a moment (with power on) and the distortion should disappear.

 Do not block the ventilation opening. Install the product according to this handbook.

 Do not install the product near any heat source such as a radiator, heat register or stove.

 Do not use uncertified connecting lines, which might cause equipment failure.

 Do not press, stretch or heat the connecting lines, which might cause damage to it.

 Please firmly grasp the plug of the connecting line when inserting and removing. Pulling the

connecting line might cause damage to it.

 Cut off power and the connecting line immediately and contact the after-sales service

center if the product or the connecting line is damaged for some reason. Continued use

without maintenance might cause smoking or off-odor.

 Do not hang or lean on the product. Doing so can cause the product to fall or become

damaged. It may also cause injury to people. Pay special attention when children are nearby.

 Please turn off power for safety if not using the product for a long time.

 Do not let the connecting line get squeezed, buckled, pulled or twisted.

 Make sure the power is turned off and the connecting lines are removed when moving the

product.

 Avoid collisions with the product. This may cause equipment failure.