- ページ 4
製氷機 Follett Maestro Chewblet 400 SeriesのPDF 設置、操作、サービスマニュアルをオンラインで閲覧またはダウンロードできます。Follett Maestro Chewblet 400 Series 20 ページ。 Ice machine and top kit
Follett Maestro Chewblet 400 Series にも： インストレーション＆サービスマニュアル (20 ページ), インストレーション＆サービスマニュアル (20 ページ)
ページを印刷する
Specifi cations
Electrical
Model number
MC400 series ice machine
Ambient specifi cations
Air temperature
Water temperature
Water pressure
Plumbing
Your new ice machine is equipped with a drain line to simplify draining the evaporator and fl oat reservoir. The
tube labeled "fl oat/evap drain" is for SERVICE USE ONLY and must NOT be connected to the ice machine drain.
Water line sizes
Drain line sizes
Slope to drain
•
Water shut-off recommended within 10 feet (3m), drain to be hard-piped and insulated
•
Separate drains for ice machine and condenser. To prevent back fl ow, do NOT connect drains.
•
Follett recommends a Follett water fi lter system be installed in the ice machine inlet water line (standard
capacity #00130299, high capacity #00978957, carbonless high capacity #01050442).
Field Wiring: countertop and wall mount dispensers with RIDE
delivery model ice machines
Consult enclosed D400A/W, R400A/W, MCD400A/W manual.
4
Maestro 400 Series Top Kit for Lancer
Full load amps
115/60/1
100 F/38 C max.
50 F/10 C min. (best performance below 80 F/27 C)
90 F/32 C max.
40 F/4 C min. (best performance below 70 F/21 C)
70 P.S.I. max. (482kPA) 10 P.S.I min. (89kPA)
Make up water (inlet to fl oat)
Condenser (water-cooled only)
Ice machine drain
Condenser (water-cooled only)
1/4" per foot (6mm per 30.4cm run)
Max. fuse size
11.0 amps
1/4" min.
3/8" min.
3/4" min.
1/2" min.
1/2" min.
20 amps
®
remote ice