- ページ 11
エクステンダー Amplitec C20L-WCDMAのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Amplitec C20L-WCDMA 13 ページ。
C20L Signal Booster
Starting
1)If it is possible, please connect the grounding screws of the booster and grounding of the
electrified wire with cable.
2)Make sure the cables between booster and antennas are firmly connected.
3) Connect the DC plug of the 5V/2A power adapter, provided by supplier with the DC+5V port of
the booster. And AC plug connects to the nearby 220V power outlet.
4) Check the signal booster can work normally or not, by checking the operation parameters on the
screen, according to the "Operation and Display Description".
5)Make a test with a phone to test the signal intensity and dialing quality in the coverage area.
Maintenance and Repairing
Common Problems and Solutions
Problems
Screen and indicator lights
are off
I.S.O on the screen flashes
after power-on
Everything is okay after
power-on, but no
improvement in signal
Working effectiveness get
worse after working for a
while
Reasonable Causes
Disconnected to power source
Isolation between outside
antenna and inside antenna is not
enough
The network of sim card is not
comply with that of signal
booster
The inside antenna is not
successfully connected
The inside antenna is broken
The outside antenna is broken
The outside antenna get loose
and not towards BTS
Feeder is broken
10
Solutions
Check the power adapter and
power outlet and reconnect
Change the distance and direction
of outside and inside antenna,
until I.S.O is not flashing
Replace sim card or booster
Fasten the connection of inside
cable and connectors
Replace the inside antenna
Replace the outside antenna
Change the direction of outside
antenna and fasten it
Replace the feeder