- ページ 2
エンクロージャー Bopla BOCARD BCD 250のPDF 組み立て説明書をオンラインで閲覧またはダウンロードできます。Bopla BOCARD BCD 250 2 ページ。
ページを印刷するassembly instructions BOCARD
1. Assembly of lid (OT) - base (UT)
BCD_OT-G-_:
2.
1.
Snap the hinge onto the base (UT) (1.). Then close the lid (OT-G-_)
by swivelling it (2.).
BCD_FO-_:
Place front frame BCD_FO-_ in position
and clamp it in 4 places.
BCD _FO-K-_:
Place front frame BCD_FO-K-_ in
position, clamp it in 2 places and screw
it to the terminal compartment.
BCD_OT-F-_:
Fix the lid BCD_OT-F-_ using 4 screws.
Fix the lid BCD_OT-F-_ using 4 screws.
Note: All lids/frames (except BCD_OT-G-_) can also be fitted rotated by 180° .
GB
2. Assembly of dividing panels and the terminal
compartment lid
as required
1.
Insert dividing
Insert dividing
panel
as required
Fit terminal compartment lid (BCD-__-KRD-_) or front frame with
Fit terminal compartment lid (BCD-__-KRD-_) or front frame with
3.
3.
integrated terminal compartment lid (BCD-__-FO-K-_). The terminal
compartment can be positioned upwards or downwards, as required (4.).
Closing mechanism for the hinged lids
BCD-_-OT-G-_ / BCD-_-OT-FSC-_:
Open:
2.
Press the recessed
areas
1.
Mechanism:
manual
lock plugs
(included)
3. Wall assembly
without wall brackets :
with wall brackets :
The dividing panel is fixed by
2.
screwing the front panel into
place.
4.
on TS 35 with DIN rail holder TSH 35-2:
snap point
open
closed
(over 90° )
(over 180° )
with tool
lockable
catch
lock SHLO 402
(included)
(accessory)
BCD 160
BCD 200
BCD 250
Assembly
1.
Hook on
Enclosure
2.
Turn and
clamp in
BOPLA Gehäuse Systeme GmbH
Borsigstr. 17-25
D-32257 Bünde
A
B
BCD 160
150
155
BCD 200
BCD 200
180
180
180
180
BCD 250
215
210
A
B
C
156,5
181
195,3
186,5
206
220,3
221,5
236
250,3
Disassembly
4.
Turn out
5.
Take off
3.
Push up
Tel.: 05223/969-0
Fax: 05223/969-100
www.bopla.de