- ページ 2

コントロールユニット Doyson S 300 FM BTのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Doyson S 300 FM BT 2 ページ。 Control module with bluetooth

ページを印刷する

S 300 FM BT USER MANUAL

HOW TO SWITCH ON AND OFF THE CONTROL MODULE: Press the control

module on/off key. The display will light up and either the radio station number

or the time will be shown on it. Press again the on/off key to switch the control

module off.

SELECTION OF CHANNEL 1, FM RADIO AND AUXILIARY AUDIO INPUT:

Press repeatedly the FM/CH key to select the audio channels, the FM radio or

the auxiliary audio input. The selected audio source will shown on the display.

GENERAL SYSTEM ON/OFF: Pressing simultaneously the on/off and > keys all

the control modules of the multiroom system will switch on while a flashing

"ON" will be shown on the display.

Pressing simultaneously the on/off and < keys all the control modules of the

multiroom system will switch off while a flashing "OFF" will be shown on the

display.

CONTROL OF BASS, TREBLE, BALANCE AND 3D-SOUND: While the control

module is on, press repeatedly the MOD key until the feature you want to adjust

is shown on the display. Then use the keys < and > to regulate the function.

TIME SETUP: Either when the control module is on or off, press repeatedly the

MOD key until the function "SET" is shown on the display. Set the time using the

< > keys. Once the time is set in one module, the rest of control modules will

automatically be sincronized.

AUTO OFF SETUP: While the control module is on, press repeatedly the MOD

key until the "AUTO OFF" function is shown on the display. The time countdown

for automatic desconexion will set by pressing the on/off key repeatedly (time

will increase in intervals of 15 minutes) or using the < > keys (time will increase

in intervals of 1 minute).

AUTO ON SETUP: While the control module is off, keep pressed the on/off key

until the "AUTO ON" function is shown on the display. The time countdown for

automatic conexion will set by pressing the on/off key repeatedly (time will

increase in intervals of 15 minutes) or using the < > keys (time will increase in

intervals of 1 minute).

SLEEP MODE: While the control module is on, press repeatedly the MOD key

until the function "SLEEP" is shown on the display. The switch off time can be set

by pressing the on/off key repeatedly (time will increase in intervals of 15 minutes

up to 90 minutes) or using the < > keys (time will increase in intervals of 1

minute).

Another way to activate this function is by keeping pressed the on/off key during

3 seconds while the control module is on. When the "SLEEP" mode is shown on

the display, the switch off time can be set by pressing the on/off key repeatedly

(time will increase in intervals of 15 minutes) or using the < > keys (time will

increase in intervals of 1 minute).

FM FUNCTIONS : To turn the FM tuner on firstly switch the control

module on. Press the FM/CH key. The latest selected radio station will be

shown on the display.

Automatic scan: Once the FM function is already selected, press shortly

the FM/CH key. The FM symbol on the display will start flashing. A long

push to the > key will make an automatic upward scan. A long push to the

< key will make an automatic downward scan.

Manual step by step scan: Once the FM function is already selected, press

shortly the FM/CH key. The FM symbol on the display will start flashing.

A short push to the > key will make a 0.1 MHz step by step upward scan.

A long push to the < key will make a 0.1 MHz step by step downward

scan.

Radio station memories: Once you have selected the radio station you

want to memorize, press twice the MOD key. The function "FM STORE"

will show on the display. Choose the memory number where you want

to memorize the radio station by using the < > keys. Then press the MOD

key to validate. The operation can be repeated for the rest of memories.

Selection of pre-set stations: Once the radio stations are memorized as

per the paragraph above, press the MOD key. "FM SELECT" will shown

on the display. The pre-set stations can be selected by using the < > keys.

ALARM CLOCK SETUP: Either when the control module is on or off,

press repeatedly the MOD key until the "ALARM" function is shown on

the display. Using the < > keys the alarm time can be set. Immediately after

the alarm mode (FM, CH, IN or BEEP) can be chosen by pressing the

lower key on the right hand side. The alarm clock volume can be also

preset using the < > keys. A small bell symbol on the display will show the

alarm clock is on.

To switch off the alarm clock when ringing just press any key.

To deactivate the alarm clock function press repeatedly the MOD key

until the "ALARM" function is shown on the display. Immediately after

press repeatedly the lower key on the right hand side until "ALARM OFF"

is shown on the display. The bell symbol will not appear on the display any

more.

The control module memorizes the last alarm clock setting if no new

features are introduced.

CALL RECEPTION AND BABY-PHONE LISTENER: Either when the

control module is on or off, calls from built-in microphone control modules

can be received. The zone number of the zone that is calling will show on

the display "CALL IN + NR".

The S 300FM can be activated as a listener control module in the baby-

phone

function.

After having activated the control module in the children's

bedroom (this must be a built-in microphone control module) press twice

the MOD key in the listener control when the module is off. "PARENT"

will show on the display. Use the < > keys to activate or deactivate the

listening function.

Up to 5 baby rooms and 5 listening areas can be selected to be working

simultaneously.

The listening volume can be adjusted using the < > keys, is independent

from the program volume and is automatically memorized by the control

module.

DO NOT DISTURB MODE: Either when the control module is on or

off, press repeatedly the MOD key until " DONT DISTURB:OFF " is shown

on the display. Press the > key to activate the "do not disturb" function.

" DONT DISTURB:ON " will be shown on the display. From that moment

the control module will not receive any call.

To deactivate this function, repeat the operation and press the key <.

" DONT DISTURB:OFF " will be shown on the display and from that

moment the "do not disturb" mode will be deactivated.

AUXILIARY AUDIO INPUT (IN): Connect the audio player jack in the

audio socket. Press the FM key until "IN" is shown on the display.

BLUETOOTH CONNECTION:

With the control module turned on, press the key

with the

symbol until the BLUETOOTH function

appears moving along the screen. Then keep this key

pressed for two seconds so that the BLUETOOTH

function goes into visible mode. BTDISCOVER will

appear on the screen.

From that moment you have one minute to search

your device "DOYSON-xxxxxx", select it to pair it

and enter the code 0000. The module will show on

the screen BT: ON to indicate that it is linked. When

sending music from your device, PLAY will be displayed

on the screen.

For future occasions you only need to connect from

your mobile device with the desired area, even when

the control module is turned off.