- ページ 5

レクタンシステム AmpliVox SS3230RTAのPDF 組立説明書をオンラインで閲覧またはダウンロードできます。AmpliVox SS3230RTA 12 ページ。 Ready to assemble multimedia lectern

AmpliVox SS / SW3230 RTA ASSEMBLY INSTRUCTIONS

GETTING STARTED

TOOLS NEEDED: Philips Screw Driver or Power Screwdriver, Rubber Mallet

• Unpack all panels from shipping box. Locate accessory box and open.

CASTER PANEL

• Locate Panel (4). Panel (4) has pilot holes on one side.

Other side is smooth. Place smooth side down on a flat

smooth surface.

• Locate the four casters (O). Two casters are locking.

These will be installed on the side where there is no

cutout.

The other two non locking casters are installed on the

side with the cutout. Use four of the (J) screws for

each caster.

• Locate four "L" brackets (R). Locate the four

remaining pilot holes on the panel. Screw one bracket

facing to the outside of panel into each pilot hole,

using one (J) screw per bracket.

• Set panel aside.

CAM LOCK AND DOWEL PIN INSTALLATION

• Locate Panels (1) (4) (5) and (11), items (E) and (P).

Lay all the panels on a flat surface with the side that

has all the cutouts facing up.

• Take one item (P) Cam Lock, and press into

each cutout with your fingers or softly tap in with

mallet.

• Repeat on all panels.

• On the edges of all four panels you will see

holes for the dowel pins, item (E). Insert a

dowel pin into each hole.

• Set all panels aside.

rubber