Programming Your Remote For TV And Audio Receiver Control
Your remote control comes pre-programmed to control the set-top box provided by Comcast. To control your
TV's power and volume and the audio receiver's power and volume, you can simply follow the steps below.
Note: TV Codes must be programmed first, then Audio Device Codes second in order for this to function.
1. Turn on the TV.
2. Locate the manufacturer's code for your TV from the appropriate list below. If the manufacturer's code is
not listed, go to comcast.com/remote to view a full list of brands and codes.
3. On the remote control, press and hold the Setup button for 3 seconds until the All Power button changes
from red to green.
4. Use the remote to enter the first 5-digit manufacturer's code on the list that matches your specific brand.
If the code is entered properly, the All Power button will flash green twice. If the green light emits one long
blink, repeat steps 3 and 4, entering a new code.
5. Press the TV Power button on the remote control. If the TV turns off, you know the code has been
accepted. Turn the TV back on and make sure that the VOL +/– and Mute buttons also work.
6. If the TV does not respond, repeat steps 2-5, testing each code listed until the remote controls the TV
functions.
TV Codes
LG 11423, 10017, 11265, 10178, 10442, 10700, 10856, 11178, 11530, 11637, 11934
Panasonic 11480, 10250, 11457, 10051, 10161, 10162, 10226, 11291, 11919, 11924, 11947, 11969
Philips 11454, 11394, 11866, 10054, 10690, 11483, 11744, 12372, 12597
Samsung 12051, 10060, 10702, 10178, 10030, 11959, 11060, 10814, 10766, 10587, 10482, 10427, 10329, 10217,
10056, 10039, 10032, 10019
Sanyo 10054, 10154, 10036, 10088, 10107, 10146, 10159, 10232, 10484, 10798, 11907
Sharp 10093, 10039, 10153, 10157, 10165, 10281, 10386, 10491
Sony 10810, 10000, 10011, 10080, 11400, 11685, 11904, 11925
Toshiba 10156, 10154, 11265, 10060, 10003, 10036, 10149, 11343, 11369, 11935, 11945, 11959, 12006
Vizio 11758, 10864, 10885, 11756
Audio Device Codes
Note: TV Codes must be programmed first, then the Audio Device Codes in order for this to function.
ADC 30531
Aiwa 30158, 30189, 30405
Bose 31229, 31933
Capetronic 30531
Carver 30189
Denon 31360, 31104
GE 30078
Harman/Kardon 30110, 30189
Integra 30135
JBL 30110
JVC 30074, 30331
Quick Start Guide
Kenwood 31313, 31570, 30027, 31027
Linn 30189
Magnavox 30189, 30531
Marantz 30189
Onkyo 30135, 30842
Optimus 31023, 30531
Panasonic 31308, 31518
Philips 30189, 31266
Pioneer 31023, 30014, 30531, 31384
Polk Audio 30189
Proscan 31254
RCA 31023, 31254, 30531
Sansui 30189
Sony 31759, 30158, 31758
Soundesign 30078
Stereophonics 31023
Sunfire 31313
Technics 31308, 31518
Victor 30074, 30331
Wards 30158, 30189, 30014, 30078
Yamaha 30176, 30354, 31176
15
ページを印刷する