- ページ 14

食器洗い機 Comcater COMENDA Hi-Line HC14 SeriesのPDF 使用説明書およびメンテナンス・マニュアルをオンラインで閲覧またはダウンロードできます。Comcater COMENDA Hi-Line HC14 Series 19 ページ。

Part 2: Reserved for Operator

2.9 REGENERATION CYCLE HC-HCXL

2.9.a FILLING THE SALT TANK
IMPORTANT
he tank is to be filled when alarm F4 appears on
T
the display.
First of all make sure that there is salt in the specific con-
tainer and proceed as follows:
1. Unscrew the cap of the salt tank and introduce coarse
kitchen salt.
2. Screw the plug back on all the way to make sure the
tank is sealed.
2.9.b RESIN REGENERATION OPERATIONS
(AUTOMATIC) (only for mod. " RA")
The resin is rinsed for a few seconds upon
every switch-on, and a MICROREGENERATION
cycle is then performed.
IMPORTANT
he MICROREGENERATION cycle takes place
T
in the background.
This could lengthen the cycle.
REGENERATION appears on the display
ATTENTION
For machines with RCD - HR-A partial regeneration can
only be activated with the tank level
2.9.c MANUAL REGENERATION OPERATIONS
(at the user's discretion)
With the machine ON, perform the following operations:
Touch the SCROLL key
Select the REGENERATION
function from the display
Touch the START key.
The REGENERATION phase
begins.
ATTENTION
A
t this point the dishwasher carries out all the necessary
operations automatically for a preset time, during which
the machine cannot be used.
At the end of the cycle, the ma-
chine switches off automatically
and the display reads OFF.
The machine is now ready for use.
ATTENTION
nly an authorised technician can program the
O
regeneration parameters.
ENGLISH
START
START
OFF
25