- ページ 12

食器洗い機 Comcater COMENDA Hi-Line HCXL SeriesのPDF 使用説明書およびメンテナンス・マニュアルをオンラインで閲覧またはダウンロードできます。Comcater COMENDA Hi-Line HCXL Series 19 ページ。

ページを印刷する

Part 2: Reserved for Operator

2.2. CLEANING (Fig. 8)

2.2. a General

Strict observance of the maintenance rules in this

section guarantees good preservation and satisfac-

tory operation of the machine and greatly reduces the

need for repairs.

ATTENTION

n case of irregularities or malfunctioning of any com-

ponent of the machine, FIRST OF ALL CHECK that

the instructions in the previous paragraphs have been

followed. Interventions must be carried out promptly at

the onset of failures to avoid worsening of the problem

and damaging further parts.

ATTENTION

aily operations to be carried out at the end of work,

with the machine OFF, the main switch disconnected,

the water supply valve closed and the wash tank empty

1. Clean the inside of the machine thoroughly.

2. Remove the basket filter (13) by turning it anti-

clockwise and lift it to perform cleaning;

3. Extract the stainless steel tank plate filter (14) from

the bottom of the machine and lift it to perform

cleaning;

4. Lift the fine filter (15) and the filter (16) for cleaning

5. Wash the filters in running water and refit them

correctly in their seats, turning them the opposite

direction.

2.3. PREVENTIVE MAINTENANCE (Fig. 8)

Preventive maintenance operations to be carried out

with the machine OFF, the main switch disconnected,

the water supply valve closed and the wash tank emp-

ty.

2.3.a Checking and cleaning the spray arms and

nozzles (Fig. 8)

Periodically check to make sure that the wash arms

(17), the rinse arms (19) and the relative nozzles are

not clogged.

Cleaning the unit:

1. Unscrew the ring nut (21/22) and lift the spray arms

2. Wash the washing and rinsing arms.

3. Remount all parts by complying with the above instruc-

them from the columns and removing any debris and

encrustations. The frequency of this operation depends

on the amount of residue or on unsatisfactory washing

results. To wash the outside of the machine, do not use

corrosive products such as sodium hypochlorite (bleach)

or hydrochloric acid (muriatic acid) with steel sponges

or brushes.

(17/19).

Clean the nozzles (18/20) if they are clogged and then

fit the parts exactly back in their original positions.

tions in reverse.

HC 10

HC 14 - HC XL

ATTENTION

egularly check and clean the spray arms, removing

ENGLISH