- ページ 11

計測機器 BOQU PHS-1705のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。BOQU PHS-1705 20 ページ。 Laboratory ph meter

2.4.5 Print setting

"Prt" appears, press "OK" to enter the printout setting mode

Note: the automatic end, manual end or calibration is completed, the

data is printed from the set;

The following conditions are not affected by this setting

1. Boot, automatic test print output

2. Print storage data

Default: ON (automatic printout)

Appears "MR CLr", press "OK" to enter the clear storage data mode,

Press "read" to confirm, there "MR nUL", said the removal was successful,

Automatically exit this setting.

2.4.7 LCD backlight setting

Appears "LEd", press "OK" to enter the LCD backlight setting mode,

Default: ON

Instrument in the boot state,

Press the "OK", "CAL" and "On/Off" keys at the same time,

Long press until the instrument displays "rST", the factory settings are

successfully restored.

- 8 -