- ページ 11
スイッチ Dahua Technology DH-PFS5452-48GT4XF-400のPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。Dahua Technology DH-PFS5452-48GT4XF-400 20 ページ。 52-port managed gigabit l2+ switch
ページを印刷する
1
2.2.3 Connecting the Power Cable
Make sure the switch is well grounded before you connect the power cable.
To connect the power cable, do the following:
Step 1
Insert one side of the supplied power cable into the AC power supply hub of the switch.
Step 2
Connect the other side of the power cable to the external AC power socket.
2.2.4 Installing SFP Module and Connecting the Optical Fiber
WARNING
Do not touch the golden finger of the SFP module when installing the SFP module.
Do not pull out the dustproof plug of the SFP module before connecting the optical fiber.
Do not directly insert the SFP module connected with the optical fiber into the SFP slot.
Pull out the optical fiber first before inserting the SFP module.
To install the SFP module and connect the optical fiber, do the following:
Step 1
Wear the antistatic wrist, and make sure the antistatic wrist and your skin are in good
contact and well grounded.
Step 2
Lift the handle of SFP module upward vertically. Hold the SFP module by both sides,
and push it gently into the SFP slot till the SFP module is firmly connected to the slot.
Figure 2-4
Connecting the GND cable
2
Figure 2-5
Connecting the power cable
6
User's Manual
3