- ページ 7
DJ機材 Ampro NEO 300 BEAMのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Ampro NEO 300 BEAM 18 ページ。 Moving head
ページを印刷するIt must use secondary safety accessory like appropriate net. The structures of the secondary accessory must
ensure that while malfunction happens, the installed parts won't fall to the ground.
While rigging, mounting or maintaining, the projector mustn't be placed in the areas listed hereinafter: the
bridge, high work areas or other dangerous areas.
The operator of the projector or its related safety items must be accepted by safety experts before first
launching or rerunning after any replacements or repairing.
The operator must ensure a test before acceptance every 4 years and the related safety measures and
installation accepted by experts.
The operator must ensure the related safety measures and its installation must be approved by the
technicians every year.
The projector may be installed in places under which people may walk by or sit. Important! Installations
in high places requires wide experience, including but not limited to load limit calculation, the installing
materials needed and regular inspection of installing materials and the projectors. If lacking the
qualifications, please don't try installation by yourself, but seek help from professionals using designated
lifting gears. Abnormal installation may cause body harm or property
damages.
The projectors must be installed in places where people can't reach. If they are removed from ceiling or
high places, professional truss must be used. It is forbidden to let any projector move freely in a room after
installation.
Note: Device falling down can cause heavy body harm! If you have any questions about its safety, don't
install any projector!
Before installation, please ensure mounting areas can endure 10 times the weight of a project at least.
5. POWER/CONTROL CONNECTION
1 POWER CONNECTION
Connection method:
•
L (Live) Brown wire
•
E (Earth) Yellow / Green bi-color wire
•
N (Neutral) Blue wire
2 CONNECTION METHOD
The fixture has 3-pin XLR connectors for DMX data
input and output as shown below.
Connection between the console and fixture, and
between fixtures must be made with 2 core screened
DMX 512
1: Ground
2: -
3: +
The voltage and frequency of the power source must
be in compliance with the ones marked on the fixture.
It is strongly recommended that each fixture are to
be connected to the power source separately so that
they can be switched on / off individually.
DMX signal cable. Maximum connecting distance of
signal cable is 150 meters. Additional DMX512
signal-amplifier is recommended for longer distance.
P. 7
English Version | NEO 300 BEAM