- ページ 11

コンピュータ・ハードウェア Ampro ReadyPanel 6.5のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Ampro ReadyPanel 6.5 20 ページ。

ページを印刷する

Chapter 1

Applying Power to the ReadyPanel

10) Power up the

ReadyPanel.

11) Verify the

ReadyPanel satisfactorily

powers on.

(The Linux 2.6 OS is shown as an example.)

GNU GRUB version 0.95 (632k lower/250768 upper memory)

Fedora Core (2.6.9-xxx)

Use the

and

keys to select which entry is highlighted.

Press Enter to boot the selected OS, 'e' to edit the

commands before booting, 'a' to modify the kernel

arguments before booting, or 'c' for a command-line.

NOTE

The GNU GRUB boot loader screen will continue to display indefinitely unless

you execute one of the listed options.

12) Using the

Operating

System (OS)

ReadyPanel

•

Plug in the ATX/AT/Lab power supply to the AC outlet.

•

Turn on the power supply.

•

Verify the ReadyPanel passes POST successfully.

•

Wait for the OS to load as shown below, and the touch controls to appear on the

touch screen, providing you the ability to load your applications onto the com-

pact flash card.

Note: If the OS does not load, an error message will appear: "Disk boot

failure, insert system disk and press enter" near the end of the boot

process.

•

Press R to reboot the system and try again or press S to enter the BIOS

Setup utility.

•

Refer to the desired OS manual (Ampro's Linux or OS Manufacturer's) that

may or may not be provided with the ReadyPanel—depending on licensing

agreements.

•

If you require drivers not installed on the compact flash, refer to the Ready-

Board Support Software CD-ROM, if available, for additional drivers and

instructions.

User's Guide

ReadyPanel Setup