- ページ 8
計測機器 Amprobe LM-200LEDのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Amprobe LM-200LED 12 ページ。 Led light meter
Amprobe LM-200LED にも： ユーザーマニュアル (9 ページ), ユーザーマニュアル (12 ページ)
ページを印刷する
Lx / fc
illuminance scales. 1 foot-candle = 10.764 Lux and 1 lux = 0.09290 foot-
candles.
Data Hold
freezes the reading present on the LCD at the moment the button is pressed.
press hoLD again to disable Data hold.
MAN Ranging
press the MAnual ranging button for useable reading.
Zero
The light sensor will change the null point over time. To reset the null point,
cover the sensor, press the ZERo button. The display will show "ADJ". when
the null reset is done, the display will read '00.0'.
SPECIfICAtIoNS
general
Display:
Sensor:
Environment:
Altitude:
Temperature / humidity
operating:
Storage:
power Supply:
Battery life:
Auto power off:
Dimension (Base):
Dimension (Sensor):
weight:
�
-EMC: En61326-1 This product complies with requirements of the
following European Community Directives: 89/336/EEC (Electromagnetic
Compatibility) and 73/23/EEC (Low Voltage) as amended by 93/68/EEC (CE
Marking). however, electrical noise or intense electromagnetic fields in the
vicinity of the equipment may disturb the measurement circuit. Measuring
instruments will also respond to unwanted signals that may be present within
the measurement circuit. Users should exercise care and take appropriate
precautions to avoid misleading results when making measurements in the
presence of electronic interference.
2000 count LCD
Silicon photodiode and filter.
indoor operation
Up to 2000m.
-10 °C to 40 °C (14˚f to 104˚f), 0 to 80 %Rh.
-10 °C to 50 °C (14˚f to 122˚f), 0 to 70 %Rh.
9V nEDA 1604, iEC 6f22, JiS 006p battery
200 hours
approx 6 min
130 x 63 x 38 mm (5.1 x 2.5 x 1.5")
80 x 55 x 29 mm (3.2 x 2.2 x 1.1")
220 g (.48 lb.) include battery
2