- ページ 5

ディスペンサー Follett 110FB425WのPDF インストレーション・マニュアルをオンラインで閲覧またはダウンロードできます。Follett 110FB425W 17 ページ。 Ice and water dispenser

Fig. 1 – Rear connections, freestanding models

12.25 " (31.2 cm)

4.75 " (11.9 cm)

4.5 " (11.4 cm)

3.75 " (9.3 cm)

2.75 " (6.8 cm)

10. Remove top front cover by removing two screws at bottom corners of cover. Lift cover slightly and pull

forward.

11. If dispenser is equipped with SensorSAFE remove protective plastic coating from dispense sensor labels.

12. Turn on dispenser power and bin signal rocker switches. Check dispenser and ice machine operation.

13. Clean ice machine according to instructions in the Cleaning section. Discard ice made during cleaning

process.

14. Turn off ice machine bin signal switch.

15. Remove dispenser hopper lid; clean dispenser according to instructions.

16. Turn ice machine bin signal switch on and replace front covers, securing with screws.

access panel

3/4" MPT drain

3/8" FPT condenser inlet location

3/8" FPT

(water-cooled only)

water inlet

3/8" FPT condenser outlet location

(water-cooled only)

9.62" (24.4 cm)

3/4" MPT ice machine drain location

power cord

NEMA 5-15

31.5" (80 cm)

14" (35.7 cm)

12.38" (31.4 cm)

110CT425A/W, 110FB425A/W

33.75" (85.8 cm)