- ページ 11

計測機器 Amprobe PM55AのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Amprobe PM55A 16 ページ。 Automatic precision pocket meter

To replace the battery

To avoid electrical shock, disconnect test leads from live circuits before opening

the case. Do not operate with open case.

1. Turn off the meter.

2. Disconnect the test leads from live circuits.

3. Loosen the screwon the case bottom.

4. Lift the end of the case bottom nearest the input test leads until it unsnaps from the case top.

Replace the battery cover and tighten the screw. Recycle the battery using approved methods.

5. Replace the battery. Observe battery polarities with positive (+) faces up (towards the case

bottom). Replace the case bottom, and ensure that the snap on the case top (near the LCD side)

is engaged.

6. Replace and tighten the screw.

Limited Warranty and Limitation of Liability

Your Amprobe

product will be free from defects in material and workmanship for 1 year from the



date of purchase. This warranty does not cover fuses, disposable batteries or damage from accident,

neglect, misuse, alteration, contamination, or abnormal conditions of operation or handling.

Resellers are not authorized to extend any other warranty on Amprobe

during the warranty period, return the product with proof of purchase to an authorized Amprobe

Test Tools Service Center or to a Amprobe

THIS WARRANTY IS YOUR ONLY REMEDY. ALL OTHER WARRANTIES - WHETHER EXPRESS,

IMPLIED OR STAUTORY - INCLUDING IMPLIED WARRANTIES OF FITNESS FOR A PARTICULAR

PURPOSE OR MERCHANTABILITY, ARE HEREBY DISCLAIMED. MANUFACTURER SHALL NOT BE

LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES OR LOSSES,

ARISING FROM ANY CAUSE OR THEORY. Since some states or countries do not allow the exclusion

or limitation of an implied warranty or of incidental or consequential damages, this limitation of

liability may not apply to you.

Repair

All test tools returned for warranty or non-warranty repair or for calibration should be accompanied

by the following: your name, company's name, address, telephone number, and proof of purchase.

Additionally, please include a brief description of the problem or the service requested and include

the test leads with the meter. Non-warranty repair or replacement charges should be remitted in the

form of a check, a money order, credit card with expiration date, or a purchase order made payable

to Amprobe

Test Tools.



XWWARNING

dealer or distributor. See Repair Section for details.



's behalf. To obtain service

