- ページ 14

ディスペンサー Follett Chewblet 7 SeriesのPDF インストレーション・マニュアルをオンラインで閲覧またはダウンロードできます。Follett Chewblet 7 Series 20 ページ。 Ice and water dispenser

Activating "Fresh Filtered Ice and Water"

If you purchased your dispenser with a Follett filter, the filter display indicator

activation has been preset at the factory.

If you are using an "after market filter," an adjustment may be made to

activate the "Fresh Filtered Ice and Water" display.

1. Remove the front panel as explained in Accessing Internal

Components.

2. Remove top panel (Fig. 13.1).

Note: For 15 Series dispensers, the right side panel must also be

removed.

3. Remove (1) screw and top of control board enclosure (Fig. 13.2).

4. Locate the DIP switches on the dispenser's control board (Fig. 14).

Use a fine-pointed object to move the "Filter" DIP switch (DIP switch

#3) to the ON position.

Deactivating the Six-Month Maintenance/Filter Change Reminder

1. Use a fine-pointed object to move the "PM" DIP switch (DIP switch

#8) to the ON position.

Not used (OFF position)

Ice only

No internal filter

Not used (OFF position)

15 minute delay

Not used (OFF position)

Six-month PM enabled

Dispenser and Ice Machine - 115 V, 230 V, 220 V

OFF

Ice and water

Internal filter supplied or to display "Fresh Filtered"

30 minute delay

Six-month PM disabled

Fig. 13

Fig. 14