ページを印刷する
Sensing : Average sensing for ACD-10 PRO. True RMS for ACD-10TRMS PRO
Safety : Meets IEC61010-2-032 (1994), EN61010-2-032 (1995), UL3111-2-032 (1999)
For ACD-10 PRO/TRMS PRO: Category II 600 Volts AC & DC, and Category III 300
Transient protection : 6.5kV (1.2/50µs surge) for all models
Pollution degree : 2
E.M.C. : Meets EN61326 (1997, 1998/A1), EN61000-4-2 (1995), and EN61000-4-3
(1996)
In an RF field of 3V/m:
Capacitance function is not specified
Other function ranges: Total Accuracy = Specified Accuracy + 45 digits.
Performance above 3V/m is not specified
Overload Protections :
ACA Clamp-on jaws : AC 400A RMS continuous
"+" & "COM" terminals (all functions) : 600VDC/VAC RMS
Power Supply : 3V alkaline button battery (ANSI/NEDA-5004LC, IEC-CR2032). One
battery for ACD-10 PRO & ACD-10 TRMS PRO.
Power Consumption : 2.5 mA typical
APO Timing : Idle for 30 minutes
APO Consumption : 0.8µA typical on all functions except on ACD-10 TRMS PRO
Dimension : L 7.8" X W 2.48" X H 1.25"
Weight : 0.412 Lb approx.
Jaw opening & Conductor diameter : 1.02" max
Accessories : Test leads (pair), battery installed, user's manual, & soft carrying pouch
Electrical Specifications
Accuracy is ±(% reading digits + number of digits) or otherwise specified, at 23°C ± 5°C
& less than 75% R.H.
Model ACD-10 PRO TRMS. True RMS accuracy of ACV is specified from 5% to 100%
1)
of range, and ACA is specified from 10% to 100% of range, or otherwise specified.
Maximum Crest Factor < 1.75 : 1 at full scale & < 3.5 : 1 at half scale, with frequency
components within the specified frequency bandwidth for non-sinusoidal waveforms.
Volts AC & DC
Amps and Volts where it is 25µA
12