- ページ 8

マイク DPA 4062のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。DPA 4062 16 ページ。 Miniature microphones

MINIATURE MICROPHONE

HEADBANDS

Adjusting the Type 4065 Headband

The Miniature Headband 4065 is pre-

formed for your convenience. However, it

requires minor adjustment in order to get

a tight, fixed position to the back of the

neck. Carefully bend the steel tube at the

areas shown on the illustration.

Note: Do not bend the steel tube near

the microphone element or near the

cable exit as you may risk breaking the

tube. The microphone element is per-

fectly omnidirectional and does not

need to point directly towards the

mouth of the performer. Avoid posi-

tioning the microphone in the air

stream from nose or mouth.

When bending the steel tube please treat

with care. The steel tube must be bent

around a curved object (min. diameter of

20mm) or a thumb in order not to break the

headband.

Do not bend near these parts of the

headband.