- ページ 8

マイク DPA 4066のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。DPA 4066 16 ページ。 Headset microphones
DPA 4066 にも：マニュアル (7 ページ), マニュアル (7 ページ)

MINIATURE MICROPHONE

HEADBANDS

Adjusting the Type 4065 Headband

The Miniature Headband 4065 is pre-

formed for your convenience. However, it

requires minor adjustment in order to get

a tight, fixed position to the back of the

neck. Carefully bend the steel tube at the

areas shown on the illustration.

Note: Do not bend the steel tube near

the microphone element or near the

cable exit as you may risk breaking the

tube. The microphone element is per-

fectly omnidirectional and does not

need to point directly towards the

mouth of the performer. Avoid posi-

tioning the microphone in the air

stream from nose or mouth.

When bending the steel tube please treat

with care. The steel tube must be bent

around a curved object (min. diameter of

20mm) or a thumb in order not to break the

headband.

Do not bend near these parts of the

headband.