- ページ 2

温度コントローラー Carbolite 201のPDF 操作説明をオンラインで閲覧またはダウンロードできます。Carbolite 201 4 ページ。
Carbolite 201 にも：取扱説明書 (8 ページ)

ページを印刷する

1. O

& K

UTLINE

When switched on, the controller lights up, goes through a short test routine, and then displays

the measured temperature and starts to control. The output light glows or flashes as heating

occurs.

The Page  key allows access to parameter lists within the controller; most lists and parameters

are hidden and cannot be accessed by the operator because they contain factory-set parameters

which should not be changed. A single press of the page key displays the temperature units,

normally set to °C; further presses reveal the lists indicated in the Navigation Diagram below.

The Scroll  key allows access to the parameters within a list. A single press displays the

temperature units; further presses reveal the parameters in the current list indicated in the

Navigation Diagram. Some parameters are display-only; others may be altered by the operator.

To return to the Home list at any time, press Page and Scroll together, or wait for 45 seconds.

The Down  and Up  keys are used to alter the setpoint or other parameter values.

2. 201 N

AVIGATION

Home

List



20.0



°C/F/k

wSP

SPrr

dwEll

MC01A 1.01

EYS

IAGRAM

Output

List

°C/F/k



Measured

OP.Hi

temperature; use

Down/Up to

access setpoint

OP is a read-only value showing the current

output power level

wSP (Working Setpoint) is only present if

the ramp rate SPrr is active

201T only

only present when

access to the Power

Limit may be required

201: PID controller

with ramp to

setpoint feature

201T: 201 with

Process Timer

option fitted

Access

List

ACCS



codE

Used in factory

configuration; not

accessible to the operator

home list