- ページ 13

セキュリティセンサー Amprobe TIC 300 PROのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Amprobe TIC 300 PRO 15 ページ。 Meet the new standard in non-contact, high voltage detection
Amprobe TIC 300 PRO にも：ユーザーマニュアル (18 ページ), クイック・スタート・マニュアル (4 ページ)

ページを印刷する

Find Quality Products Online at:

MAINTENANCE AND REPAIR

If there appears to be a malfunction during the

operation of the voltage detector, the following steps

should be performed in order to isolate the cause of the

problem:

1. Check the battery.

2. Review the operating instructions for possible

mistakes in operating procedure.

Except for the replacement of the battery, repair of

the voltage detector should be performed only by a

Factory Authorized Service Center or by other qualified

instrument service personnel.

Cleaning

The front panel and case can be cleaned with a mild

solution of detergent and water. Apply sparingly with a

soft cloth and allow to dry completely before using. Do

not use aromatic hydrocarbons or chlorinated solvents

for cleaning.

Battery Replacement

Use a Phillips blade screwdriver to remove the battery

hatch screw. Lift the hatch. Remove the battery and

replace it with a 9 V alkaline battery. Make sure the seal

is in place. Close the battery hatch and replace the screw.

GlobalTestSupply

www.

.com

[email protected]