- ページ 7
トランスデューサー Daiichi Electronics HSQT2-93AのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Daiichi Electronics HSQT2-93A 16 ページ。 High speed multi power line transducer
ページを印刷する2.3 Option
Item
The countermeasure against
hydrogen-sulfide (H
S) gas
2
2.4 Specification and performance
Item
Compliant standard
CE compliant
directive
Safety
Influence of
temperature
Update time of
measured value
Response time
Ripple of output
Power-supply
temporary-blackout
allowed time
Power-supply rush
current
Insulation resistance
Voltage tests
(Withstand voltage)
Impulse voltage tests
(Lightning impulse
withstand voltage )
Vibration
Shock
Environmental conditions
：Hydrogen sulfide, 1ppm，40℃，80％RH， Air supplying amount, Less than 1000L/H
Electrical measuring transducers for converting a.c. electrical quantities to analogue or
digital signals. JIS C 1111：2006 [ IEC 60688：1992，Amendment 1 (1997)，Amendment2 (2001) ]
Electro-magnetic compatibility directive (EMC Directive) 2004/108/EC
(Only auxiliary supply DC24V specification conforms.)
Low voltage directive (LVD) 73/23/EEC (Only auxiliary supply DC24V specification conforms.)
JIS C 1010-1：2005 (IEC 61010-1：2001)
Measurement category Ⅲ (The category to the measurement performed with fabric equipment)
Maximum use voltage, 300V
Degree of contamination, 2 (Usually, the grade which only contamination of non-conductivity
causes. However, temporary conductivity, which originates in dew condensation depending
on the case occurs.)
Use group Ⅰ (For indoors. It is used in the place where the equipment is careful and is
dealt with under the conditions generally seen at a laboratory, a factory, etc.)
10～35℃ ：Inside of class index.
0～45℃ ：Within 2 times of class index.
-10～+55℃：Within 3 times of class index.
5ms
Time within ±1％ of final constant value, when step input is charge.
[ A，V，W，var ] With no moving average：Less than input one cycle ＋10ms.
2 times of moving average：Less than input one cycle ＋15ms.
3 times of moving average：Less than input one cycle ＋20ms.
[ Hz ] Less than 1 second.
Less than 1％ peak-to-peak to output span.
20ms
AC110V：Below 5.5A (Time constant：below 10ms)
AC220V：Below 11.0A (Time constant：below 10ms)
DC110V：Below 4.0A (Time constant：below 10ms)
DC24V ：Below 6.5A (Time constant：below 10ms)
Between electric circuit and case (earth).
Between input and output and auxiliary supply.
Between analog output non-insulates (minus common).
Between electric circuit and case (earth).
Between input and output and auxiliary supply.
Between analog output non-insulates (minus common).
Between electric circuit (analog output excludes) and
case (earth).
Between input and auxiliary supply (output is earth
connection).
JIS C 60068-2-6：1999 (IEC 60068-2-6：1995).
Vibration frequency range：10～55Hz，Vibration amplitude：0.15mm(Single-sided amplitude )，
Number of sweep cycles：10 times
JIS C 60068-2-27：1995 (IEC 60688-2-27：1972)
Peak acceleration：500m/s
Specification
Specification
2
6
Above 50MΩ at DC500V
AC2210V (50/60Hz) 5 seconds
5kV 1.2/50μs
Positive and negative polarity,
for each 3 times
Q-208-081