ページを印刷する
INSTALLATION
•
•
•
Projection
•
Displays a grid pattern for you to adjust the image size and
Test Pattern
focus and check that the projected image is free from
distortion.
•
Light Source
•
Settings
•
If activated, the projector will send electronic signal out
12V Trigger
when it is turned on.
Choose "On" to turn on the High Altitude mode. When this
High Altitude
function is turned on, the projector fans operate at full speed
Mode
continuously to cool down the projector's temperature.
Front: The factory default setting.
Front Ceiling: Turns the image upside down for ceiling-
mounted projection.
Rear: Reverses the image so you can project from behind
a translucent screen.
Rear Ceiling: Reverses the image so you can project from
behind a translucent screen for ceiling-mounted
projection.
Light Source Mode: Use this function to choose your
desired light source mode.
Reset Light Timer: Resets the light source timer.
Light Source Information: Shows the number of hours
the lamp has been used.
17