- ページ 14

ミュージックペダル Ampt ANALOGER ADG-1のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Ampt ANALOGER ADG-1 20 ページ。 100% analog bucket brigade delay

Functional Specifications:

Note: All specifications subject to change.

Time, Feedback, Rate and Amount control range all extended with the

use of Expression Pedal or control voltage input.



Delay Time: 35mS – 700mS Bucket switch down (all BBDs),

17.5mS – 350mS with switch up.



Feedback: 0 to greater than infinite. Capable of self-oscillation.



Rate: LFO RATE, from 0.08Hz to 40Hz



Amount: LFO amount control from OFF to 40% of Time sweep.



Drive: up to +23dB of control or level matching.



Mix: Center 50%. Adjust from full 100% wet to - 44dB



Tone: ~600Hz center tilt like filter.

HPF +6dB - -15dB, LPF +4dB - -7dB.



Bucket Toggle: 1 or 2 BBDs (4096 or 8192 buckets)



LFO toggle: Triangle or slewed Square wave



Bypass Footswitch: effect on/off user selectable True Bypass or

JFET Buffered



Tails/Mod Footswitch: User selectable modulation kill or engage

trails bypass (sometimes called Spillover).



Expression Switch: 4 position rotary selects Time, Feedback,

Rate or Amount controlled by expression pedal. Time is bi-polar

modulation (0V=-50%, 5V=+50%) all others are additive control.

Under the hood Switches:



True Bypass / Buffered bypass: Selects between true bypass a

classic JFET buffered bypass

 2nd Stomp Switch function: Selects if 2

enables/disables modulation or is tails mode.

(Accessible by removing ADG-1 Cover)

<14>

stomp switch