- ページ 2

計測機器 Amptek X-123SDDのPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。Amptek X-123SDD 4 ページ。 X-ray spectrometer

c. Select "Search for the best driver in these locations." Then check the box "Include this location in the search:" Select

"Browse" and navigate to the \USB_driver\Win2K_XP folder of the Amptek Installation CD. Click Next>.

d. Once the driver has been installed you will see the "Completing the Found New Hardware Wizard" screen below. Click

Finish.

e. Now that the USB driver is installed, browse to the Amptek Installation CD and copy the ADMCA directory to the local

computer's C:\ drive. For example if the computer's CD drive is the letter D, copy D:\ADMCA to C:\ADMCA.

f. Browse to the C:\ADMCA directory and open the Admca.exe file to launch the software. Right click on the Admca.exe

file and select Create Shortcut. This shortcut can then be dragged to the desktop.

X-123SDD Connection Instructions

1. Verify that the X-123SDD is completely unplugged (both USB and power).

2. Use the USB cable to connect the X-123SDD USB connector, which is located on the back panel, to the PC's USB

connector.

3. Plug the DC power supply into a 110/220 AC outlet. Connect the other end to the X-123SDD power supply input, which is

labeled "5VDC" and is located on the back panel.

NOTE: Grounding is critical to obtaining the best performance. Amptek strongly recommends using a single point ground for

the system. To ensure this use a 3-prong to 2-prong adapter on the power supply of any notebook computer. This prevents

the notebook from introducing a second ground into the system.

X-123SDD Spectrometer

XR100SDD

X-Ray Detector

and Preamplifier

Detector H.V., Cooler Power, Preamp Power

Figure 1: Connection Diagram

USB/

DP5

RS232

Digital Pulse

Processor

+5VDC

X-123SDD Quick Start Guide Rev A1

USB/

RS232

PC5

Power Supply

& Interface

Board

+5VDC

Power

Adapter

Page 2 of 4