- ページ 5
懐中電灯 Fomei Digitalis Pro T400のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Fomei Digitalis Pro T400 8 ページ。 Battery flash
ページを印刷する•
Modeling light setting (LED 10W)
o Press the „LED" button to control output of modeling light.
o Press once to turn on/off modeling light, 2 times for highest output and 3 times for
moderate output power.
•
Test button
o Press the „TEST" button.
o If the flash is full charged, „Ready" is displayed.
•
Slave mode
o Press the „CELL" button. „CELL" is displayed.
o Photocell is activated. The flash will slave sync if another flash is fired.
•
Sound setting
o Press the „SOUND" button. „SOUND" is displayed.
o The flash beeps when it is ready to flash again.
•
Battery status indicator button
o Press the battery status indicator button.
o The display shows the battery status.
•
HSS
1. Use the HSS function through wireless trigger (S-III). Combine S-III transmitter with
camera's hot-shoe and install S-III receiver in the slot of the flash. Compatibility only
with Nikon and Canon.
2. Press and hold the „C/HSS" button for 2 seconds. Press the button one more time and
the letter „h" is displayed.
3. Press the „+" button on the transmitter. The indicating diode indicates that the HSS
mode is ready for use. Press the „-" button on the transmitter after photography shoot
ends to save the battery energy. The wireless trigger is not included.