ページを印刷するDPS TS Series Trash & Sewage pumps are designed for economical and trouble-free operation
in handling solids-laden liquids. Pumps feature a large volute design which allows them to re-
prime automatically in a completely open system without the need of suction or discharge
check valves. This is workable with the pump only partially filled with liquid and a completely
dry suction line. Pumps will be able to handle up to 3" (75mm) spherical solids, depending on
the pump model. In case that the pump shaft or bearings need service or repair, the entire
rotating assembly can be back pulled out without disturbing the pump casing or pipe work.
Rotating assembly is sealed with an o-ring, allowing for external adjustments of the impeller to
wear-plate clearance.
Pump Features:
PRIMING IS DONE AUTOMATICALLY
After initial priming TS Series Pumps are designed to re-prime
automatically in a completely open system, without the need of a discharge or suction check
valve. This can be achieved with the pump casing only partially filled with liquid and with a
completely dry suction line. The TS's ability to handle air overcomes priming and vapour
handling problems common in conventional centrifugal pumps.
EXTERNAL SHIMLESS ADJUSTMENT
The external shimless cover plate allows for easy adjustment of clearance between the
impeller and the wear plate. This eliminates the need to re-align belts and couplings etc. The
collar and adjusting screw allow for incremental adjustments of the wear plate clearance.
Once the adjustments have been made, the collar locks into place maintaining the clearance
settings even if the cover plate is removed.
SOLIDS HANDLING IMPELLER
Two-vane, semi-open, solids handling impeller handles up to 3" dia solids, depending on the
pump model. Pump out vanes on the impeller shroud reduce the build-up of foreign material
behind the impeller and reduce pressure on the seal.
REMOVABLE COVERPLATE
The removable cover plate provides quick and easy access to the pump interior without
disconnecting the piping. Clogs and blocking material fibre can be removed and the pump
returned to service within minutes. The impeller, seal, wearplate and flap valve can also be
accessed through the cover plate opening.
ABRASIVE HANDLING MECHANICAL SEAL
Double floating, self-aligning, oil lubricated mechanical cartridge seal with stationary and
rotating face of silicone carbide
REMOVABLE ROTATING ASSEMBLY
Back pull out removal of the rotating assembly allows for easy inspection of the pump shaft or
bearings without disturbing the pump casing or pipe work. Simply remove the bolts for the
back of the pump and the rotating assembly slides out
www.dieselparts.com.au