ページを印刷するThank you for purchasing 1byone Wireless
Doorbell. Please read this instruction manual
before use to ensure safe operation.
1. Package Contents:
・1 x Push Button
・2 x Doorbell Receivers
・1 x Double-sided Adhesive
・1 x Instruction Manual
・1 x 3V Battery for Push Button (Type: CR2032)
If any package contents are visibly
damaged or missing, please immediately
contact 1byone Customer Service at
[email protected] for assistance.
2. Parts Names:
LED indicator
Plug
Volume button
Ringtone selector button
Sound and flash button
Pairing button
Speaker
Receiver
- 01 -
Push button
Push Button
Parameters:
Voltage of plug in receiver
AC 110-120V (US)/AC 220-240V (EU)
Voltage of push button
DC3V (Type CR2032)
Frequency
433.92MHz+100KHz
Operating range
150m/492ft (without obstacles)
Receiver: ＜0.3W
Power consumption:
Push button: ＜10mA
＞ 85dB within 0.5m/1.6ft
Receiver' s ring volume
Working temperature
-20℃~50℃
3 . Power Supply:
Receiver – Please plug into a power outlet.
Push button – Please insert the battery using the
following procedure:
・ Insert a screwdriver into the small access port
at the bottom of the push button and
remove the push button's back cover.
・ Insert the 3V battery (type CR2032) into the
battery compartment, making sure the
battery surface marked with a "+" is facing
upwards.
- 02 -