- ページ 6
室内装飾品 AMQ ACTIV-ProのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。AMQ ACTIV-Pro 7 ページ。 Sit-to-stand table
AMQ ACTIV-Pro にも： インストレーション・マニュアル (12 ページ), 組立マニュアル (16 ページ), ユーザー＆トラブルシューティングマニュアル (12 ページ)
ページを印刷する
The motor won't run
Evaluation
Is the power cable connected to the main power
supply with correct voltage?
Make sure that all plugs are inserted correctly in the
control box and to the columns.
One or more columns/cables are defective.
Look for visible damages on cables, control box
and columns.
The base operates irregularly or is tilted
Evaluation
Visual observation.
The base stops and can only run downwards
Evaluation
Is the table at its highest position?
The table could be overloaded.
The table will only run downwards even though the frame is not overloaded
Evaluation
Visual observation.
If your issue persists, please contact AMQ Customer Care
at [email protected] or (877) 801-0370.
915 Walsh Avenue / Santa Clara, CA 95050 (877) 801-0370 amqsolutions.com
!
troubleshootingGUIDE
ACTIV-Pro sit-to-stand table
Solution
Connect plug to main power supply to make sure
the voltage is OK. If not then try to connect a lamp.
Check all connections.
Perform resetting and run a bit upwards. If a column
will not run upwards after resetting, it is defective.
Damaged parts must be exchanged - contact us for
a warranty kit.
Solution
Perform resetting.
Solution
When the table has reached the maximum height, it
can only run downwards.
Remove some of the load and try again.
Solution
Perform resetting.