- ページ 2

コントローラー Amroad ID5101のPDF クイック・インストール・マニュアルをオンラインで閲覧またはダウンロードできます。Amroad ID5101 4 ページ。 Home station
Amroad ID5101 にも：インストレーション・マニュアル (20 ページ)

IO Circuit and Application

The ID5101, Video Indoor Station, provides 8 Input ports and 4 Output port for your house

to set up Home Safety and Security; you may refer the following examples for each

application.

Please connect the adapter which comes with the package to the DC +12V as below and

then connect your end devices according to your requirement.

LIGHTING

The illustration (diagram) shows you how to use the first GPIO connector and wire to

connect Adapter and two Relay Boards for Lighting Control.

ALARM

The illustration (diagram) shows you how to use the first GPIO connector and wire to

connect DC power and Relay Board for ALARM device.

NOTE:

Please use wire

tape to seal

unused wire to

isolate the wire.

800-0000007-00-00

Wire connection for

Lighting

Magnetic Switches

Both diagram and photo of Magnetic Switch installation show you how to use the second

GPIO connector to connect with Magnetic Switches, and you can connect up to four

magnetic switches accordingly based on the diagram or photo.

CO Detector, Emergency Button... and Door Bell Button

The status of the following safety devices will be shown on the main screen. The following

diagrams show you how to use 3rd GPIO connector to connect CO Sensor, Emergency

Button, and Gas Detector.

CO Detector

Emergency Button

NOTE:

The second GPIO

connector is used to

connect up to four

Magnetic Switches.