- ページ 10

トリマー DR PRO-62VのPDF 安全・取扱説明書をオンラインで閲覧またはダウンロードできます。DR PRO-62V 20 ページ。
DR PRO-62V にも：安全・取扱説明書 (20 ページ), 安全・取扱説明書 (20 ページ)

Installing Blower Tube

To prevent accidental starting that could cause serious personal injury, always remove the Battery Pack from the Blower when

assembling parts together.

Tube Slots

(Both Sides)

Figure 4

Align Tab

To Lock

UN-LOCK

LOCK

Figure 5

Installing Battery Pack

To prevent accidental starting that could cause serious personal injury, always move the Power Switch button to the full off

position before inserting the Battery Pack.

Lock/Release

Figure 6

PRO-62V BLOWER

Raised Portion

Note: No tools are required to install the Blower Tube on the blower.

(Both Sides)

Note: You can check the charge of your 62V battery by pushing the indicator

button on the front of the battery. The number of Green LED indicators will tell you

the % of power left in the battery. 1=25%, 2=50%, 3=75% and 4=100%.

Align the Blower Tube slots with the raised portion on the Blower Housing

(Figure 4).

Slide the Blower Tube over the outlet on the Blower Housing until it is

seated firmly against the flange base.

Rotate the Blower Tube 90° in the direction indicated to lock it in place

(Figure 5). The raised tab on the top of the Housing will align with the

raised portion on the Tube.

To remove the Blower Tube, reverse the process.

Slide the Battery Pack into the battery cradle on the Blower Housing,

aligning the ribs in the cradle with the slots in the battery until it is latched

into place (Figure 6).

Check that the Battery is securely locked into place.

To remove the battery press and hold the latch on the side of the Blower

Housing and slide the battery away from the blower.