- ページ 4
マザーボード AMS AS3930のPDF マニュアルをオンラインで閲覧またはダウンロードできます。AMS AS3930 19 ページ。 Standard board, demo kit
ページを印刷する
AS3930 Standard Board
1
Introduction
The AS3930 Demo Board demonstrates the main features of the AS3930. These include 1D wake-
up pattern detection, readout of false wake-ups, possibility to measure current consumption in
different operating modes, and measurement access to SPI communication and data output.
Additional features are accessible via USB through the GUI that was developed for easy access to
the register map. Features such as the programmable wake-up pattern, adjustable sensitivity level,
low power listening modes and several more can be programmed via the GUI. The influence
different settings have on the detection efficiency can be observed right away by using the 125 kHz
Wake-up Transmitter Board.
1.1
Kit Content
The AS3930 Demo Kit contains the following items:
1x AS3930 Demo Board
1x 125kHz Wake-up Transmitter Board
1x 9V power supply
2x CR2032 Coin Cell
1x USB stick
1x USB Cable
2
Getting Started
Connect the +9V DC Power Supply at "F" on the 125 kHz Wake-up Transmitter Board.
Start to transmit Wake-up Patterns via AUTO "C" or PATTERN "B".
Insert the +3V Battery at "H" of the AS3930 Demo Board.
Turn on the AS3930 Demo Board via the ON/OFF – switch "C". When turning on the boards all
indication-LEDs flash up once.
As soon as the AS3930 Demo Board receives a Wake-up Pattern, the RSSI LEDs flash up for
0.5s and show the actual Received Signal Strength.
ams Demo Kit Manual, Confidential
[v1-02] 2014-Jul-10
Page 4
Document Feedback