- ページ 8

マザーボード AMS AS3933のPDF マニュアルをオンラインで閲覧またはダウンロードできます。AMS AS3933 20 ページ。 Standard board, dev system, demo kit

AS3933 Standard Board

4.2

Description of the GUI of the Receiver

Figure 8: Graphical User Interface of the AS3933 Demoboard

All adjustments can be saved via Store Settings in the lower right corner of the Receiver tab. If all

settings should be reset to the default configuration push the button Preset Default. All

configurations that are set by the GUI correspond to the Register Map of the AS3933. The Register

Map can be viewed via View/Register Map (Ctrl+M). All registers can be updated manually via

File/Readout Registers (Ctrl+R) or the update of the registers is done automatically via

File/Automatic Update (Ctrl+U).

Note: A possible firmware update can be done via Help/Firmware Update (Ctrl+F). Load the latest *.bin file and update the

firmware.

The AS3933 Demoboard has a three dimensional antenna. Each of the three antenna inputs can be

enabled or disabled.

The AS3933 features two low power modes, which can be selected here. By default no power

saving mode is enabled which means that all channels are active all the time. For details on the low

power modes please see the AS3933.

ams Demo Kit Manual, Confidential

Page 8

[v1-02] 2014-Jul-11

Document Feedback