- ページ 2

フードプロセッサー Dr Zero BM-217AのPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。Dr Zero BM-217A 2 ページ。
Dr Zero BM-217A にも：マニュアル (20 ページ)

ページを印刷する

For Sorft Food

18oz

Garlic

Minced

18oz

within

Seconds

within

For Hard Food

18oz

Carrot

Chopped

18oz

within

Seconds

within

Problems

Possible Reasons/Solutions

①Check whether the bottom of pod is clean and ensure no food

blocks connection when placing it on the container.

Motor doesn't start or blade

②There is too much food in the container.

assembly doesn't rotate

③The unit is overheated, Unplug and wait for about 15 minutes

before pod is securely placed on the lid.

④Check whether the plug is securely inserted into the electrical outlet.

Maybe you've chopped too much food at one time, or the pieces

Food is unevenly chopped

are too big.Cut the food into smaller pieces. Chop smaller amounts

per batch.

The food has been over processed. Use brief pulses or process the

Food is chopped too ﬁne or

food for a shorter time. Let the chopping blade assembly stops

too watery

completely between pulses.

Pumpkin

Grinded

18oz

onion

Seconds

within

Seconds

Meat

Minced

18oz

Nut

Seconds

within

Seconds

1. Before use, clean the glass jar, blade and top cover.

2. Take oﬀ the main machine and top cover, place the meat in

clean place.

3. Place the blade on the blade supporter.

Minced

4. Please make sure that the blade is on the blade supporter

after put in the foods.

5. Place the top cover, and then the motor unit, and make sure

they are in correct position.

6. Insert the plug, and switch on the power.

7. Hold the motor unit with your hand, and press the button to

start running. Rlease the button to stop running.

Minced

8. After release the switch, please do not remove the motor unit

immediately, wait until the blade stops rotating and then cut

oﬀ the power, remove the motor unit.

9. Blades are very sharp, in order to avoid injury, please take out

the blade ﬁrstly, and then take out the foods.

CAUTION: To protect against bowl from heat deformation

and leak, do not put hot water or food which the temperature

is higher than 70℃.

INSTRUCTIONS