- ページ 14

コントローラー AMS Controls MP328CLのPDF リファレンス・マニュアルをオンラインで閲覧またはダウンロードできます。AMS Controls MP328CL 17 ページ。 Closed loop backgauge controller

New Program

Move to the home

position

Done

AMS Controls

5/23/2012

Move in until

switch is on or at

end of the table

Engage gripper

Done

When part information is programmed, and the RUN button is

pressed the gripper will try to find the part in the forward

direction. As long as the programmed part is shorter than the

clearance position, the part will be processed.

physically longer than the clearance position, the gripper must be

jogged back to allow the part to be accepted. This must be done

on the first part of that length, and the machine will readjust itself

for the remaining parts.

If "metal flow" is set to NORMAL, the home position will be at the

total sheet size plus the clearance distance. If it is REVERSE,

then the home position is at the clearance distance only. In the

first case, the operator will be placing a sheet on a transfer table

in front of the brake. The clearance position of the gripper should

be far enough away so that it will not interfere with the operator

Run

Is the gripper

switch on?

MP328CL Controller

Engage gripper

Move to the next

position

Turn the brake on

Wait for dwell dn

Turn the brake off

Wait for dwell up

Last move?

Yes

Move to home

Done

If the part is

Gripper