- ページ 2

計測機器 DR. ALFRED MULLER AE400のPDF マニュアルをオンラインで閲覧またはダウンロードできます。DR. ALFRED MULLER AE400 7 ページ。 Portable anemometer, optional with telescopic mast

DR. ALFRED MÜLLER

METEOROLOGISCHE INSTRUMENTE KG

R. FUESS

Display AE402-D

The display is placed in a build-in housing 135 x 135 mm and contains the sensor interfaces,

the display-driver, the accumulators and the battery charger. The display can be supplied by

any direct voltage between 9 and 15 Volt. As long as the display is supplied with external

voltage, the accumulators will be charged. The display can also be operated with external

voltage, without containing accumulators. The operating time after recharging the

accumulators is 80 h with normal brightness of the direction LED's, switching the LED's to

bright reduces the operating time to 35 h.

When the LED's indicating m/s or kt

respectively inst. or avg. become dark, the

accumulators has to be recharged. The

display unit AE402-D shows wind direction

by a LED-ring with 36 LED's with a

resolution of 10 degrees. It shows wind

speed by a large LCD-display with 18 mm

high characters. Kt. or m/s are selectable by

a push button, instantaneous or 2 min

average can be selected by a second button.

With a third button the power can be

switched on or off. On the right side, there

is a small switch for showing the direction

LED's normal or bright.

Wind Speed Sensor W400-1 and the Wind Direction Sensor W400-2

The wind sensor W400-1 and W400-2 are

small, sensors for wind direction and wind

speed. It consists of anodised aluminium,

polyamide and stainless steel. As wind

speed sensor, it uses a tri-cup anemometer

and a reed contact output.

4 magnets give 4 impulses per revolution.

1 m/s = 4 Hz

As direction sensor, it uses a vane together

with a ring-potentiometer with 5 k-Ohms.

The sensor has a 11 m long connection

cable with plug; extension cables up to 20

m are available. To fix the sensor on the

tripod, it has an 8 mm female thread.