- ページ 6

錠前 AMSEC ESL15のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。AMSEC ESL15 10 ページ。 Electronic lock
AMSEC ESL15 にも： 操作説明 (4 ページ)

ページを印刷する
AMSEC ESL15 取扱説明書
American Security Products Co.
A Function is "set" in the following standard sequence:
C - # - (2 Digit Function Code) - # - (Master User Code) - # - (Function Setting) - #
After each "#", a Short Good Combo Tone (Short Warble) will be given, until the last "#" of the sequence is pressed,
o
at which time it sounds a Long Good Combo Tone (Long Warble) indicating the successful setting of a function.
Any time during the sequence, if incorrect numbers are pressed, a Bad Combo Tone (4 short beeps) will sound and
o
the lock will go to rest. A function that has an on/off condition rather than a numeric setting requires a 1 (on) or a
0 (off) as the Function Setting.
Time Delay Settings (Functions 01, 02 & 03)
To Enable Time Delay:
o
C - # - 01 - # - (Master Code) - # - 1 - #
To Disable Time Delay:
o
C - # - 01 - # - (Master Code) - # - 0 - #
To set the Delay Period:
o
C - # - 02 - # - (Master Code) - # - (Delay Period, 1-99 minutes) - #
To set the Open Period:
o
C - # - 03 - # - (Master Code) - # - (Open Period, 1-9 minutes) - #
Multiple User Settings (Functions 10, 11, 12 & 13)
To Enable Multiple User Mode:
o
C - # - 10 - # - (Master Code) - # - 1 - #
To Disable Multiple User Mode:
o
C - # - 10 - # - (Master Code) - # - 0 - #
To Add or Enable a Subordinate User:
o
C - # - 11 - # - (Master Code) - # - (User Number, 1-8) - #
To Disable a Subordinate User:
o
C - # - 12 - # - (Master Code) - # - (User Number, 1-8) - #
To Disable all Subordinate Users (1-8):
o
C - # - 13 - # - (Master Code) - # - 1 - #
Note: Disabling a Subordinate User does not erase the combo associated to that user, so if you re-enable
that User number it is not necessary to re-enter a combo for it unless you are treating it as a new user.
Dual Combo (Functions 30 & 31)
To Enable Dual Combo Mode:
o
C - # - 30 - # - (Master Code) - # - 1 - #
Note: Enabling Dual Combo Mode turns on (enables) User 1 if a User 1 is not already active in Multi-User
mode. The User 1 combo must be set before this feature will function. See Section 4 for changing
instructions.
To Disable Dual Combo Mode:
o
C - # - 30 - # - (Master Code) - # - 0 - #
Revision A
ESL15 Operating Instructions
Page 6 of 10
Released Aug. 9, 2018