- ページ 15

医療機器 Dr. Mach LED 115のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Dr. Mach LED 115 15 ページ。 Spot light with led technology

Mach LED 115

Table 206 – Recommended separation distances between portable and mobile

for EQUIPMENT and SYSTEMS that are not LIFE-SUPPORTING (see 6.8.3.201 b))

portable and mobile RF communications equipment and the MACH LED 130

The MACH LED 115 is intended for use in an electromagnetic environment in which radiated RF disturbances are controlled. The custom-

er or the user of the MACH LED 115 can help prevent electromagnetic interference by maintaining a minimum distance between portable

and mobile RF communications equipment (transmitters) and the MACH LED 115 as recommended below, according to the maximum

output power of the communications equipment

Rated maximum output

of transmitter

0,01

0,1

100

For transmitters rated at a maximum output power not listed above the recommended separation distance d in meters (m) can

be estimated using the equation applicable to the frequency of the transmitter, where P is the maximum output power rating of

the transmitter in watts (W) according to the transmitter manufacturer.

NOTE 1 At 80 MHz and 800 MHz, the separation distance for the higher frequency range applies.

NOTE 2 These guidelines may not apply in all situations. Electromagnetic propagation is affected by absorption and

reflection from structures, objects and people.

59060001

RF communications equipment and the EQUIPMENT or SYSTEM -

Recommended separation distances between

Separation distance according to frequency of transmitter

150 kHz to 80 MHz



, 1

0,12

0,37

1,17

3,69

11,67

Edition 01

80 MHz to 800 MHz



, 1

0,12

0,37

1,17

3,69

11,67

02.08.2012 / Bak Page 15/15

Dr. Mach

Lamps and Engineering

800 MHz to 2,5 GHz



, 2

0,23

0,74

2,33

7,38

23,33