- ページ 10
歯科医療機器 Dr. Mach Mach 130のPDF 取付説明書、使用方法をオンラインで閲覧またはダウンロードできます。Dr. Mach Mach 130 19 ページ。 Wall attachment
ページを印刷する
Wall attachment Mach 120/130
Mach LED 120/130
The lights Mach 130 and Mach 130F are normally supplied with integrated transformer and connection
cable with shock-proof plug. The socket used must be installed according to IEC or VDE 0100-710
requirements. In case of the lights Mach LED 120, Mach LED 120F, Mach 120 and Mach 120F the
transformer is positioned in the wall bearing.
Once the electrical connections have been completed, check that the system functions correctly in a no-
load operation trial run.
When connecting to an external transformer, the emerging voltage U will be approx. 10-20% above rated
voltage because of no load and anticipated lead losses. There is no point in making any adjustments until
the lamps have been completely mounted.
4.2 Position of transformer – Dr. Mach lamps
Lamps
Mach 120 / 120F
Mach 130 / 130F
Mach LED 120 / 120F
Mach LED 130 / 130F
* Transformer included in the extent of supply
5.3 Wall lights with external transformer / power supply
a. Lights Mach LED 120 / 120F and Mach 120 / 120F
59860002
4. Electrical connection
4.1 Preparing the electrical connection
Wall attachment
External transformer
X*
X
X*
X*
Transformer or
power supply
Wall bearing
Bracket
Transformer
in the lamp housing
X*
In case of the lights Mach LED 120, Mach LED
120F, Mach 120 and Mach 120F the transformer is
positioned in the wall bearing.
It is possible to connect these lamps direct to a
power supply cable through the wall.
Optionally the lights can be connected by the
supplied connection cables with shock-proof plug to
the wall socket.
Edition 11
Dr. Mach
Lamps and Engineering
Remark
For
models
electronic transformer –
potentiometer instead of
change-over switch
25.25.2011 / Bak Page 10/19
with