- ページ 22

冷蔵庫 Electrolux 241540102のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Electrolux 241540102 40 ページ。 Side-by-side refrigerator

Automatic Ice & Water Dispenser

PRIMING THE WATER SUPPLY SYSTEM

Your refrigerator's water supply system includes several tubing lines, an advanced

water filter, a distribution valve bank, and a reserve tank to ensure ample supply to

the ice and water dispenser at all times. This system needs to be completely filled

with water when first connected to an external supply line.

CAUTION

UTION

For proper dispenser operation, recommended water supply pressure should fall between

20 psi and 100 psi. Excessive pressure may cause water filter to malfunction.

To prime the water supply system:

1 Begin filling the tank by pressing and holding a drinking glass against the

water dispenser paddle.

2 Keep the glass in this position until water comes out of the dispenser. It may

take about 1½ minutes.

3 Continue dispensing water for about 3 minutes to flush the system and

plumbing connections of any impurities (stopping to empty the glass as

necessary).

NOTE

The water dispenser has a built-in device that shuts off the water flow after 3 minutes of

continuous use. To reset this shutoff device, simply release the dispenser paddle.

CAUTION

UTION

Pushing the dispensing paddle in for more than 4 minutes may cause the dispenser motor

to overload and stop. The overload protector resets automatically after 3-4 minutes.