- ページ 25

冷蔵庫 Electrolux Built-In DishwasherのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Electrolux Built-In Dishwasher 40 ページ。 Built-in oven
Electrolux Built-In Dishwasher にも： 取扱説明書 (36 ページ), 取扱説明書 (44 ページ), 取付説明書 (28 ページ), 取扱説明書 (28 ページ), 取扱説明書 (27 ページ), 取扱説明書 (12 ページ), 取扱説明書 (22 ページ), ヒントとレシピ (36 ページ), 取扱説明書 (18 ページ), オーナーズマニュアル (21 ページ), オーナーズマニュアル (13 ページ), オーナーズマニュアル (29 ページ), ユーザーマニュアル (27 ページ), 取扱説明書 (17 ページ), 取扱説明書 (15 ページ), インストラクションブック (18 ページ), 取扱説明書 (27 ページ), 取扱説明書 (18 ページ), サービスマニュアル (50 ページ)

ページを印刷する
Electrolux Built-In Dishwasher 取扱説明書
• CLOon; Clock on/off.
• CLO12hr;12/24hourtimeofdaydisplay.
• F-CF; Fahrenheit
/ Celsius display.
• UPO; Adjusting oven temperature.
• rSt; Reset to default factory settings.
SETTINGTHE CLOCK-
OF DAY
The clock may be set for 12 or 24 hour time of day operation (see advanced settings section).
The clock has been preset at the factory for the 12 hour operation. When the range is first
plugged in, or when the power supply to the range has been interrupted, the display will show
"CLO 12:00". The clock must be set before the oven can be used.
When power to the unit has been interrupted, "12:00" appears and flashes in the display. To
set the Clock in this case, skip step 1 in the example below and follow steps 2 and 3.
To set the clock (example for 1:30)
1.
Press USER PREF _:_,,,,) u ntil you get to the CLO 12:00 menu page.
2.
Press
pads to set the time of day to 1:30. The pads hi or |o can also be
pressed to raise or lower the actual time displayed.
3.
Press START _
to accept the changes and go back to user preferences menu display.
4.
Press CANCEL (,_ when finished to get back to the standard oven display.
SETTINGCLOCK DISPLAY- ON OR OFF
The oven control can be programmed to display the time of day or not. The oven has been
preset at the factory to display the time of day.
Changing clock display between ON and OFF
1.
Press USER PREF _
until you get to the CLO on menu page.
+
2.
Press io or hi to toggle between displaying or hiding the clock.
3.
Press START I_
to accept the changes and go back to user preferences menu display.
4.
Press CANCEL (_
when finished to get back to the standard oven display.