- ページ 3

エア・ハンドラー AirSource CustomAirのPDF 据付・操作・メンテナンス説明書をオンラインで閲覧またはダウンロードできます。AirSource CustomAir 20 ページ。 Air handling units, airsource heatpumps

WARRANTY

General

To be read in conjunction with AirSource Ltd standard Terms & Conditions of Sale.

The equipment is covered against defective parts and workmanship under the terms

of the AirSource Ventilation Ltd warranty for the period of 12 months from the date

of delivery, and is restricted to installations within the UK only.

Any replacement parts supplied under the warranty shall be warranted for the

unexpired period of the warranty or 3 months from delivery whichever period is the

longer.

Procedure

In the event of component failure during the warranty period please notify our

service department, the following details will be required to process any warranty

claim:

 The unit serial number.

 Full commissioning documentation.

 Full description of the fault. Further details/checks may be required to

be carried out prior to our engineer's attendance at site.

 A purchase order number in the event that the fault is not covered under

the terms of the warranty.

An engineer will be scheduled to attend at the earliest availability to carry out an

inspection/repair of the fault reported. Our response will depend on the availability of

an engineer and the parts required to carry out the repair. Work outside of normal

hours will not be covered under the terms of the warranty.

Any specific access equipment required for safe working is to be provided and

erected for our use and any obstructions to the equipment are to be removed to

enable a clear working area around the unit/faulty component. Sufficient space

should be available for the removal of components if required – see installation

requirements within this manual.

Invalidation

The warranty may be refused for the following reasons:

of Warranty

 Failure to install, set up, put to work or maintain any part of the

equipment as specified in AirSource Ventilation Ltd Installation,

Operation and Maintenance Instructions.

 Misapplication of product or components.

 On receipt, failure to identify any damage to equipment on the delivery

note & notify AirSource Ventilation Ltd in writing within three (3) days.

 Modifications to designed arrangement or performances without the

prior written approval of AirSource Ventilation Ltd.

 Damage caused to equipment on site through lack of adequate

protection from the elements or misuse by other trades.

 Failure to observe all normally accepted engineering practices during

installation, commissioning and subsequent operation of equipment.

Installation, Operation & Maintenance Manual