Environmental protection and saving energy
3 Environmental protection and saving energy
a
o
c
r
e
-
-
r
i
v
-
n
E
d
a
o
n
n
-
-
y
m
-
e
i
n
n
t
n
a
s
l
v
p
i
r
g
o
n
-
e
t
g
e
t
3.1 Disposing of packaging
The packaging materials are environmentally compat-
ible and can be recycled.
Sort the individual components by type and dispose
▶
of them separately.
3.2 Saving energy
If you follow these instructions, your appliance will use
less energy.
Select the cooking zone to match the size of your
pan. Centre the cookware on the hob.
Use cookware whose base diameter is the same dia-
meter as the hotplate.
Tip: Cookware manufacturers often give the upper
diameter of the saucepan. It is often larger than the
base diameter.
¡ Unsuitable cookware or incompletely covered cook-
ing zones consume a lot of energy.
Cover saucepans with suitable lids.
¡ Cooking without a lid consumes considerably more
energy.
Suitable cookware
4 Suitable cookware
Cookware that is suitable for induction cooking must
e
o
a
r
S
w
-
t
a
c
e
l
u
o
k
b
i
-
have a ferromagnetic base, i.e. it must be attracted by
a magnet. The base must also match the size of the
cooking zone. If cookware is not detected on a cooking
zone, place this on the cooking zone with the next
smallest diameter.
Cookware
Recommended cook-
ware
Suitable
Not suitable
Notes
¡ Do not use adapter plates between the hob and the
cookware.
Materials
Stainless steel cookware in a sandwich
design that distributes the heat well.
Ferromagnetic cookware made of enamelled
steel, cast iron or special induction cookware
made of stainless steel.
The base is not fully ferromagnetic.
Cookware bases that contain aluminium.
Cookware made from normal thin steel,
glass, clay, copper or aluminium.
Environmental protection and saving energy en
Lift lids as infrequently as possible.
¡ When you lift the lid, a lot of energy escapes.
Use a glass lid.
¡ You can see into the pan through a glass lid
without having to lift it.
Use pots and pans with flat bases.
¡ Uneven bases increase energy consumption.
Use cookware that is suitable for the quantity of food.
¡ Large items of cookware containing little food need
more energy to heat up.
Cook with only a little water.
¡ The more water that is contained in the cookware,
the more energy is required to heat it up.
Turn down to a lower power level early on.
¡ If you use an ongoing power level that is too high,
you will waste energy.
Product Information according (EU) 66/2014 can be
found on the attached appliance pass and online on
the product page for your appliance.
4.1 Size and characteristics of the cookware
To be able correctly detect the cookware, you must
take the size and the material of the cookware into con-
sideration. All cookware bases must be perfectly flat
and smooth.
Use Cookware test to check whether the cookware is
suitable. Refer to
→ "Cookware test", Page 15 for more details.
Properties
This cookware distributes the heat evenly,
heats up quickly, and ensures that it can be
detected easily.
This cookware distributes the heat evenly,
heats up quickly, and ensures that it can be
detected.
If the ferromagnetic area is smaller than the
base of the cookware, only the area that is
ferromagnetic heats up. As a result, the heat
is not distributed evenly.
These cookware bases reduce the ferromag-
netic area, which means that less power is
emitted to the cookware. This cookware may
not be sufficiently detected or may not be de-
tected at all, and therefore does not heat suf-
ficiently.
¡ Do not heat up empty cookware and do not use
cookware with a thin base, as this may become very
hot.
5
ページを印刷する