- ページ 7

食器洗い機 Bosch DISHWASHERのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Bosch DISHWASHER 30 ページ。 Dishwasher bosch
Bosch DISHWASHER にも：取扱説明書 (30 ページ), 取付説明書 (34 ページ), 取扱説明書 (30 ページ), 取扱説明書 (28 ページ), 取扱説明書 (38 ページ), 取扱説明書 (42 ページ), 取扱説明書 (32 ページ), 取扱説明書 (36 ページ), 取扱説明書 (30 ページ), 取扱説明書 (24 ページ), 取扱説明書 (26 ページ), 取扱説明書 (40 ページ), 取扱説明書 (28 ページ), 取扱説明書 (29 ページ), 取扱説明書 (28 ページ), 取扱説明書 (28 ページ), 取扱説明書 (28 ページ), 取付説明書 (50 ページ), 取付説明書 (20 ページ), 操作方法 (24 ページ), 操作説明 (36 ページ), 取扱説明書 (25 ページ), 取扱説明書 (46 ページ), 取扱説明書 (31 ページ)

ページを印刷する

Water softening system

To ensure good washing results, the

dishwasher requires soft water, i.e.

containing low amounts of lime, otherwise

white limescale will be deposited on the

utensils and inner container.

Tap water above 9° Clarke must be

softened. The water is softened with salt

(regeneration salt) in the water softening

system of the dishwasher.

The setting and therefore the required

amount of salt depends on the degree of

hardness of your tap water (see table).

Setting

The amount of salt dispensed can be set

from

to :

Salt is not required at the set value

– Find out about the hardness value of

your tap water. Your water utility

company will help you with this.

– Set value can be found in the water

hardness table.

– Open the door.

– Switch on ON/OFF switch (.

– Hold down programme button # and

press START button )" until : .... is

indicated on the digital display.

– Release both buttons.

The LED for button # flashes and the

digital display 8 displays the factory

setting :

To change the setting:

– Press programme button 3.

Each time the button is pressed, the

set value increases by one level; when

the value of :

the display jumps back to :

– Press START button )".

The chosen setting has now been

stored.

– Close the door.

has been reached,

(off).

Water hardness table

:DWHU

KDUGQHVV

YDOXH

&ODUNH

+DUGQHVV

PPROO

UDQJH

VRIW

PHGLXP

KDUG

6HW YDOXH

RQ WKH

PDFKLQH

¯¯

¯³

¯´

¯±

¯Å