- ページ 19

食器洗い機 Bosch HV68T53UC SeriesのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Bosch HV68T53UC Series 27 ページ。 500 series built-in dishwasher

Intensive Drying

The final rinse uses a higher temperature which improves the drying

results. The running time may increase slightly.

To turn intensive drying on:

Press the [On/Off] button.

Hold down the "A" button and press [Start] until the display indi-

cates "d:00". Release both buttons

Press the "A" button until the display shows "d:00".

Press the "C" button to turn intensive drying on or off. "d:01" = ON

and "d:00" = OFF and press [Start] to save setting.

Auto Power Off (model dependent)

To save energy, the dishwasher is turned off 1 minute after the wash

cycle ends. This setting can be adjusted from P:00 to P:02.

To change the setting:

Press the [On/Off] button.

Hold down the "A" button and press [Start] until the display indi-

cates "d:0x" (x can be any number). Release both buttons.

Press the "A" button until the display indicates "P:0x".

Press the "C" button until the display corresponds with your require-

ments.

P:00 = dishwasher does not turn off automatically

P:01 = dishwasher turns off automatically after 1 minute

P:02 = dishwasher turns off automatically after 120 minutes (2 hours)

Press [Start] to save the setting

InfoLight® (model dependent)

An LED illuminates the floor to indicate the unit is running. If the appliance is

installed at eye-level, the LED is not visible.

To change the setting:

Open the door and press the [On/Off] button.

Hold down the "A" button and press [Start] until the display indicates

"d:00".

Release both buttons.

Press the "A" button until the display shows "1:01".

Press the "C" button to switch between "1:01" = ON and "1:00" = OFF

and press [Start] to save.

Child Lock (model dependent)

Start the desired cycle.

Hold down the button that says "Child Lock" underneath it for approxi-

mately 3 seconds until the display reads "CL".

The "CL" will be indicated now if any button is pressed and the pro-gram

will not be reset.

To deactivate the child lock, hold down the "Child Lock" button for approxi-

mately 3 seconds until the display no longer reads "CL".